How To Change Oil in a Honda CR-V



Don’t let old oil damage your engine or decrease the efficiency of your Honda CR-V, especially if you’re debating to yourself about “whether it’s time to sell my Honda”. Learn the basic oil change steps to keep your vehicle maintained. Use a free VIN lookup tool to pick up the right oil and oil filter before you get ready for this maintenance project.


Prepare Your Work Area

There are a few tools and materials you’ll need to effectively change your oil. Here are some basic tools and pieces of equipment to gather before you get started:

  • Oil
  • Oil filter
  • Wrench
  • Oil filter wrench
  • Oil drain pan
  • Funnel
  • Work gloves, goggles and other safety gear

Park your CR-V on flat, dry ground. You’ll need to spend some time under your CR-V, so you may wish to jack it up for more room and use a dolly to comfortably move under your vehicle. Always be sure your vehicle is secure before working in or around it.

Oil runs more efficiently if it’s hot. However, extremely hot oil can be a hazard to work around. For best temperatures, change your oil approximately 30 minutes after it’s been running.


Drain Your Old Oil

Locate your Honda’s oil reservoir underneath your vehicle. Place your oil drain pan under the reservoir and slowly open the drain plug. Open it completely and wait until the oil is completely drained from your oil reservoir.

Wipe off the drain plug and replace it. Be sure not to over tighten the plug, but your goal is a firm seal.


Replace Your Oil Filter

Just like your motor oil, oil filters come in a range of sizes and designs. Be sure you have the correct oil filter for your CR-V. Removing your oil filter will result in additional oil draining from the system, so carefully slide the oil drain pan under your oil filter and remove it. Some filters can be easily removed by hand while others require an oil filter wrench.

Check the gasket of your new and old oil filter. This rubber O-ring often sticks to your CR-V. Be sure to remove the old gasket and double-check your new filter has a gasket. Install the new oil filter and gasket, taking care not to over tighten it.


Add New Oil to a Proper Level

Remove the oil cap from under your hood to fill up your reservoir. Use your funnel to safely pour new oil into your oil reservoir. Verify the size of your reservoir to be sure you don’t overfill or under fill it. Check the level with the dipstick and continue filling until the oil level is within the ideal limits.

It may be necessary to briefly run your engine to allow the new oil to circulate before you drive. After running your Honda’s engine for a few minutes, turn it off and let it sit. Check the oil level again to see if it’s still within correct limits.


Learn More About Maintaining Your Honda CR-V

Changing the oil in your Honda CR-V is an excellent way to get to know your vehicle and get a hands-on look at routine maintenance. For more information about the oil change process, like how long does an oil change take, visit your trusted auto parts store website or stop by a local store to learn more from knowledgeable and friendly staff.







Site Policy

One thought on “How To Change Oil in a Honda CR-V

  1. there are at least 4 bolts down there all tighter than shit. No oil comes out. which fucking super tight bolt????????????????

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.